We get questions about condensation from time to time; what’s normal, what should I expect, are my waders leaking?
Before we dive into what condensation looks like and what can be done to manage it, a little background on why.
How Breathable Fabric works
The material used on breathable waders works in this way; there are thousands of tiny holes, that are too small for moisture (water) to fit through but are big enough for vapor or air to move through. This allows air to flow through, hence making them breathable, but keeps water from passing through. Because the human body naturally passes moisture out through the skin, a bit of condensation build up throughout the legs, feet, knees and on the ankles is normal. This is just a function of moisture escaping the body and being left on the inside of the breathable membrane as the warm air escapes out through the fabric and leaves moisture behind.
Condensation dampness occurs when there is water moisture in the vapor, and as the air escapes through tiny holes in the membrane it leaves the moisture behind on the inside face of the fabric. This moisture then transfers or rubs onto the wearers inner layers. Condensation usually feels like dampness to the touch on the outside of the inner layer, that doesn’t soak all the way through to the skin. The dampness can be heavy at times, depending on the circumstances.
One thing to keep in mind is that you don’t have to be sweating or overly warm to experience condensation…the human body naturally expels moisture at all times.
Are my waders leaking or is this condensation?
You might be wondering how to tell the difference. First off, if you have multiple small damp spots on your pants that occur on both legs, but aren’t wet through to the skin then it is condensation. The spots can be small and limited to a single area, or they can be large and cover large parts of both legs, feet and torso. The first time you experience condensation it can be tricky to determine what the cause is. Just remember, if the layers you’re wearing under your waders are damp on the outside, but not wet through to the skin then it’s most likely condensation. If this has happened to you there are things that can be done to help manage it.
Epic condensation! The photo above is an example of poor layering choices (not wearing breathable layers), dressing too warmly for a cool morning which turned into a warm spring day combined with a long and brisk hike. This worked up quite a sweat and transferred moisture to the pants. In this extreme example of condensation the anglers long underwear under those sweatpants remained completely dry.
Managing condensation; switch it up
First thing is to switch your layers up. Try different combinations of pants, and socks. Sometimes just switching to a more breathable, fast drying, and moisture wicking layer can make all the difference in the world. If you’re wearing cotton pants, jeans, or cotton socks switch to wool or synthetics.
Two layers; no jeans!
We often recommend wearing two layers of pants under your waders; first a thin base layer, such as a synthetic or wool long underwear, and then another synthetic fleece pant over that. The weight of these layers can be adjusted for the weather conditions; heavier in cold weather and lighter in warm weather. The reason for two layers is this: when you’re working up a sweat and expelling a lot of moisture, it can build up on the inside of the waders and then brush back onto the base layer of pants, getting the outer part of the base layer damp. With a single layer this can be a little uncomfortable. But with two layers it only transfers to the top layer and your inner base layer keeps you nice and warm.
Jeans are the worst layer you can wear under waders, for several reasons. Jeans aren’t very breathable, are restrictive and are also abrasive so can damage the seam tape on your waders long-term.
We often do two layers of socks as well. A thin liner and a thicker outer sock. This helps form a buffer than mops up any condensation and helps keep your feet from that cold clammy damp feeling.
Layer down for the hike in
We often hike long distances into our fishing spots. Often this requires walking several miles at a brisk pace, and includes scrambling/climbing over hills, logs, and obstacles. This can work up quite a sweat. We usually take an upper layer off and unzip our waders or roll them down if possible for the hike. Then once we’re fishing and settle back into a normal pace we layer back up and get after it.
We hope you find this information helpful. If you have any questions at all send us a message.