Category: Video

Easy fly change tip with Jordan

This is a neat tip from Jordan Young-Treadway @treadwatersfly on how to tame your Skagit head and sink tip while swapping a fly without reeling in any line at all. If you’re working through a run and want to make sure that you start again at the same distance, this trick lets you easily swap flies without reeling in your line. Without tying off to your rod like Jordan shows here your fly line will float away and tug on your tippet, making swapping flies more difficult. Happy fishing!

Posted on by — Leave a comment

Carrying a long handle net with the BKCNTRY 25 Backpack

Here is Jordan Young-Treadway (@treadwatersfly on Instagram) showing how he carries his long handle guide net on walk and wade trips. By looping it through the net holding loop at the bottom of his BKCNTRY backpack and also supporting the top with the roll top clips, it makes the net easily accessible when it’s time to scoop up a fish. Happy fishing out there. 

Posted on by — Leave a comment

Zipper Cleaners – why, how and when to clean your zippers

We recommend cleaning and lubricating the zippers on waders on a regular basis.  Zipper Cleaner and Lubricant and Zipper Lubricant Stick from Gearaid do the job nicely and will help keep your zippers operating smoothly and performing like they should.  If your zipper is dirty, or isn’t running as smoothly as it once did then pick up one or both of the products mentioned here and fix it up. Happy fishing!

Posted on by — Leave a comment

Neoprene Gravel Guards – Why are they tight fitting?

We get asked about the tightness of the neoprene gravel guards on the Primo Zip GD and S14 waders. We designed them to be tight fitting for one main reason – to keep sand and gravel out of your boot. Loose fitting gravel guards can allow sand, silt, and gravel to get up inside the boot, and can get pushed up by heavy current unless securely hooked in place. More about the lace hook below.

But first, let’s talk about the function of gravel guards. In this video I had been wading through a side channel that was full of thick and deep silty sand and mud. With each step I was sinking into the mud, and even though I had been wading in fast current only moments before the gravel guard was still firmly in place where it needed to be to keep the inside of my boots clean and clear of sand, mud and gravel.

Check out this short video for a detailed view of how I use the gravel guards

Tuck it up inside

The functional purpose of a tight gravel guard is that it makes the lace hook somewhat redundant, and in some cases the lace hook may not even need to be used. Fit is going to be different for everyone, depending on wader size and boot size, so this may not apply to everyone. Also, some boots have a lace hook attachment near where the gravel guard sits naturally, and some boots do not. For me, the gravel guards fit tightly enough over the boot that I don’t need to use the lace hook at all. I just tuck it up inside the gravel guard itself. The guard doesn’t move on me, even when wading in the heaviest currents.

Avoid damaging your boots and waders

I like tucking the lace hook up inside the gravel guard (and not attaching it to the boot) because stretching the gravel guard way down towards the toe on a boot, where the hook is located on some boots, can pull and put stress on multiple parts of the wader and on the boot and boot laces. My waders and boots they last longer for me because I don’t do this.

This can happen if the lace hook doesn’t reach easily or comfortably. If it doesn’t reach easily, we don’t use it.

Something to keep in mind is that straight out of the box the neoprene gravel guards may seem tight, but they will loosen up a bit over time and become easier to pull down over your boot. They are designed to keep sand and gravel out of your boots, and will do their job well with or without the lace hook.

Happy fishing!

-Nick

Posted on by — Leave a comment

Wading Belt Safety Tips

For wading safety, we highly recommend wearing a wading belt anytime you are in or around water in fishing waders. Why? Because it may help save your life if you end up falling in the water and swimming.  A tight wading belt will help trap air in the lower part of the waders, and help keep them from filling up with water.  Water is heavy, and waders that are full of water are extremely heavy and cumbersome. Even the strongest person will struggle to pull themselves out of the water with waders full of water. We hope you find this tip helpful. Happy and safe fishing everyone!

Posted on by — Leave a comment