Designed with comfort in mind, the Primo Zip Guide Edition waders use a high quality TIZIP® waterproof main zipper to help take the production out of mid fishing session bathroom breaks, and makes getting in and out of your favorite pair of waders oh so easy. Scope this video for all the deets on the new Primo Zip waders.
With the warm easy days of summer fading in the rearview mirror, we took time out for a quick trip over the mountains to the dry and fertile area of Eastern Washington for some trout fishing. We met up with Leaf Seaburg of Methow Fishing Adventures, and set off with high expectations. All expectations were exceeded with plenty of fish catching and fun having. Enjoy these photos from this great early fall day on the river.
We woke up early (5:15am!), strapped up our DRYFT Primo Zip front waders, stuffed lunches and drinks into our BKCNTRY packs and headed for the river. Fishing didn’t slow up all day- with solid takes on dries and streamers keeping the action moving quickly from first light well into the afternoon.
Due to the evolving situation with COVID-19 in our area we are putting plans in place to help keep everyone around us safe. Our staff is healthy and safe here, but we are putting these safeguards in place to keep it that way and to protect our customers. We will be limiting office visits and our overall exposure outside of the home, but will continue to process and ship orders as usual at this time.
During this time we expect that the time it takes us to process orders will increase, with possible delays of 3-7 days at times.
Also processes such as exchanges, returns and repairs may be a little slower than normal. We will continue to do these operations, but are expecting each to take on average several days longer than usual but in some cases may be up to a week delay. We thank you for your patience during these unprecedented times.
To help keep everyone safe we will be exercising and abundance of caution by putting the following safeguards in place:
Closing our offices to outside visitors to isolate our office staff, warehouse equipment and product stock
Regularly disinfecting commonly touched surfaces around our offices and warehouse
We will be wearing gloves when handling product and packing orders.
Keeping our distance and working from home when possible to limit exposure to each other
Anyone displaying any symptoms of illness will stay at home.
This is a hard time for small business in America and around the world. From disruptions to our supply chains to instability in the financial markets and consumer confidence, we have started to feel the effects. We appreciate each and every one of you, and thank you for your business and support. We will continue to support you by operating as normally as possible.
Remember that the best safeguard for you and your family is distance and isolation. Sounds like a good time to get some fresh air, go explore a wild place and do some fishing.
We will be monitoring the situation closely and post updates as needed.
Finding a leak and repairing your breathable waders
Use these instructions and photo examples below to find and repair pinholes, tears, or holes in your breathable waders.
If there is a visible tear or hole then skip this step and proceed to step 2. To find a leak, first carefully visually inspect the area and see if you can see any tiny holes or tears. Often times you’ll be able to find the spot just by looking closely. If there is no visible hole or tear, then the alcohol method works well to find it. To do this turn the waders inside out, and spray or rub a small amount of rubbing alcohol over the area you think is leaking. Then flip the waders back right side out and look for the wet spot. Any leaks will show as a damp spot on the outer side of the fabric. Mark this with masking tape or a marking pen, dry the waders and then move on to the repair.
Usually a small tear or leak can be completely repaired with just a little Aquaseal. Once you locate the leak, the easiest repair is to coat one or both sides with Aquaseal. A tip for using Aquaseal is to heat the bottle just a bit in warm water, which makes it much easier to use. To spread it, use a flat squeegee (a piece of cardstock or a business card works well) to form a thin layer over the affected area. We recommend using some masking tape to mask off the area around the tear or pinhole to keep it contained to just the area around the tear.
For a durable repair using the material supplied in the repair kit, usually for a larger tear or rip, use a piece of the fabric supplied to cover the tear. Cut a piece of fabric to the relative size of the tear allowing it to overlap. Then Aquaseal over the tear, stick the fabric down and seal the edges of the fabric with Aquaseal. This will create a permanent patch. Before doing any Aquaseal repair mask off the area with some masking tape, scotch tape, or any tape to help keep the Aquaseal in a neat area over the repair. Make sure to remove the tape after 10-15 minutes while the Aquaseal is still wet.
The seam tape that is included in the repair kit is heat activated. This is a bit more advanced, and there is potential for damage since you’ll be applying heat to an area of the fabric. For at home, an old iron set to medium high temp can work well to ‘iron on’ a bit of seam tape to the inside of the waders. This probably won’t be necessary and is not normally required. However this can seal the inside on a small tear, pinhole, or seam nicely when done correctly. This backing can also be done with gear repair tape like Tenacious tape.
Get back to fishing.
Note: Also recommend carrying Aquaseal UV on trips. It cures within 20-30 seconds in direct or indirect sunlight (UV) and can save the day in a pinch.
Photo examples of patching a tear.
In these photo examples we will show you steps to locate and repair a tear in waterproof breathable wader fabric.
1 – 3. Photos showing the hole. This tear is visible on the exterior and interior. Photo 3 shows what the alcohol test looks like. For non visible pinholes it will just look like a wet spot.
4. Apply backing on the inside. In this photo we used heat sealed seam tape, essentially applied with a hand held iron. In place of seam tape you can use a gear repair tape like Tenacious tape, or skip this step altogether. If skipping, we recommend putting some regular tape on the inside over the hole to prevent Aquaseal from squeezing through in the next step.
5 & 6. Apply Aquaseal. We usually cut a small piece of cardboard stock from the packaging to apply. Apply Aquaseal and smooth over the hole, making sure it completely fills and covers the hole.
7. Measure and cut a piece of fabric from the supplied repair kit. Tenacious tape can be used in place of wader fabric in this step as well. Just be sure to cut the tape patch oversized enough so that there is at least 1/2 inch extra on all sides to stick to the fabric, and not over glue.
8. Apply a thin layer of Aquaseal to the backside of the fabric piece. Again use a small piece of cardboard or a business card as a tool.
9. Stick it down and let it dry. If the edges are lifting up you can use some masking tape to hold it down temporarily. So long as there isn’t a lot of extra glue coming out the edges the tape can be removed once it is dry.
10. To make a clean looking patch, surround the patch and any areas you don’t want to Aquaseal over with masking tape. Then apply Aquaseal around the edges of the patch. Be sure to remove the tape while the Aquseal is still wet. Otherwise it will be permanent. This step is completely optional.
11. The finished patch. This patch is very durable.
Did you know DRYFT is a small independent family owned business? The two owners, Nick and Sam, and their families run daily operations and oversee all aspects of the business. If you’ve ever reached out to us with questions you’ve likely talked to one of us. We hand pack each order ourselves, and take pride in the products we sell. We appreciate your business and support and would like to say thank you. We hope you enjoy the holiday season with your family and friends.